武昌伴游-武昌伴游

绵阳附近有没有服务

 Crusher, mobile crusher, crusher

National hotline
 Crusher - crusher - China crusher home - website with ranking for sale
 Crusher - crusher - China crusher home - website with ranking for sale
Current location: China crusher home > Crusher manufacturer > Crusher >

Working principle of stone crusher

Source: unknown Author: dede58.com popularity: Time of publication: 12:17, July 22, 2020

Stone crusher is widely used. It is a kind of professional sand production equipment. The professional crushing technology of the equipment is the most needed development now. Before starting the crusher, proper amount of grease should be injected between the thrust plate and the adjusting seat to reduce the damage of the thrust plate and the bearing maintenance. The outer edge of the working circle of the hammer end is Φ 2000mm, the working length of the rotor body is 2790mm, and the hammer heads are placed in 6 rows and 11 rows. The average weight of hammer head is 131.7kg.

 Working principle of stone crusher

The crusher has high efficiency in the production process, so it must be installed correctly when installing the crusher. The frame in the equipment is the installation foundation of the whole equipment parts. When the moving jaw goes down, the angle between the elbow plate and the moving jaw becomes smaller. Under the action of the pull rod and spring, the movable jaw plate leaves the fixed jaw plate. Before starting the machine and during the crushing process of the equipment, the belt should be checked Whether the tightness is appropriate.

  Working principle of stone crusher

The working principle of the crusher: the motor drives the belt and pulley to move the moving jaw up and down through the eccentric shaft. When the moving jaw rises, the angle between the elbow plate and the moving jaw becomes larger, so as to push the moving jaw plate closer to the fixed jaw plate, and at the same time, the material is crushed or chopped to achieve the purpose of crushing; the protective plate is divided into ordinary protection plate and end guard plate, with a total of 21 protective plates, with an average mass of 221kg A total of six end guards with an average mass of 255kg are limited to be placed at both ends of the rotor.

Next: no more Last article: Function of crusher rotor
Keywords: Crusher